|
|
|
The Partners Fillet Knives
This fillet knife set is designed with the idea that two people can be eternally connected. I'm not a philosopher so the wording may lack a little but the thought is there. The 1/16" X 7/8" X 7.25" upswept blades on these fillet knives are made from high carbon ATS-34 stainless steel and are 12.5 inches overall. The blades have been triple tempered, by me, with a sub-zero quench to a ~Rc60. The back of the knives have a thumb rest for heavy straight down cutting. The blades are hollow/flat ground and have a medium flex. The bolsters are stainless steel and are dovetailed to mesh with the Desert Ironwood and stabilized Redwood burl scales. The spine of the blades have my hand file work and a stainless steel lined lanyard hole. The handle bolts are also stainless steel. The 7/8 oz. leather sheath is hand sewn and dyed in a mahogany color. These are excellent knives for fresh or salt water fishing. The handles scales can be different on your "Partners" fillet knife set. The handle material is your choice but may affect the cost if you want an exotic natural scale like Mastodon ivory or wood. If you would like Micarta handle scales the cost would be $500.00 for the two knife set. The filework can also be the same on each knife blade if you like. The names of the partners can be etched into each blade at no additional cost. $600.00 (For the above set) A similar knife set would take about 6 weeks to make for you with free shipping in the U.S.A.
THE BARRAMUNDI
The blade on this fillet knife is 3/32" X 7/8" X 9" made from high carbon ATS-34 stainless steel. Because the Barramundi is intended for heavier duty work it has slightly less flex than the Cobia or Redfish fillet knives that I make. The spine has my hand filework that is pictured above. The cutting edge is also serrated for 2" to aid in cutting difficult areas of the fish. The handle is tan canvas Micarta with stainless steel hidden bolts. The lanyard hole is lined with stainless steel. The blade has been triple tempered with a sub-zero quench to help with cutting edge retention. The 7/8 oz. leather sheath is hand sewn and dyed in a light brown color. $300.00 This fillet knife is currently available for shipment with free shipping in the U.S.A.
THE BARRAMUNDI
The blade on this fillet knife is 3/32" X 7/8" X 9" made from high carbon ATS-34 stainless steel. Because the Barramundi is intended for heavier duty work it has slightly less flex than the Cobia or Redfish fillet knives that I make. The spine has my hand filework that is pictured above. The cutting edge is also serrated for 2" to aid in cutting difficult areas of the fish. The handle is tan canvas Micarta with stainless steel hidden bolts. The lanyard hole is lined with stainless steel. The blade has been triple tempered with a sub-zero quench to help with cutting edge retention. The 7/8 oz. leather sheath is hand sewn and dyed in a light brown color. $300.00 This fillet knife is currently available for shipment with free shipping in the U.S.A.
The REDFISH
The 1/16" X 7/8" X 7.5" upswept blade on this fillet knife is made from ATS-34 stainless steel and is 12 inches overall. The blade has been triple tempered with a sub-zero quench to a ~Rc60. The back of the knife has a thumb rest for heavy straight down cutting. The blade is hollow/flat ground and has a medium flex. The bolsters are stainless steel and are dovetailed to mesh with the Tan Canvas colored Micarta scales. The handle bolts and lanyard hole are also stainless steel. The 7/8 oz. leather sheath is hand sewn and dyed in a light brown color. Excellent knife for fresh or salt water fishing. $225.00 (no filework) This fillet knife is currently available for shipment with free shipping in the U.S.A.
The COBIA
The 3/32" X 5/8" X 9" blade of this fillet knife was designed with the salt water fisherman in mind. It is made from premium high carbon 440C stainless steel. The blade has been sub-zero triple tempered. The blade is custom hollow /flat ground for cutting ease. The spine of this blade has my hand file work, it runs from 1/4" in front of the bolster to 1" from the blade tip. The bolsters are stainless steel and are dovetailed to accept black canvas Micarta scales. The three hidden handle bolts and lanyard hole liner are stainless steel. Along with the knife comes a hand sewn 7/8 oz. leather sheath dyed in a black color to match the handle. $250.00 This fillet knife is currently available for shipment with free shipping in the U.S.A.
|
